2005-01-29
Bo's ICOM IC-746PRO

Brief Summary
- Dimensions: 287(W) x 120(H) x 316.5(D) mm, 9 kg
- HF + 6 m + 2 m
- 100 Watt, all bands
- Incredible Digital features:
- 32 Bit IF-DSP and 24 Bit AD/DA Converter
- Digital IF Filter creates 51 types of filter widths and soft and sharp
filter shapes
- All Mode Digital Modulation and Demodulation
- Built-in RTTY Demodulator and Decoder
- Digital Twin Pass Band Tuning (PBT)
- Digital RF Speech Compressor
- Microphone Equalizer
- Digital IF filter and manual notch in the AGC loop
- Phase Shift Network
- Noise reduction
- Manual Notch
- 102 Total Memory Channels Independently Selectable Tuning Shapes for CW
& SSB
- SSB/CW Synchronous Tuning
- Auto & Manual Notch Filter
- CW Memory Keyer
- VOX
- Auto Antenna Tuner
- SWR plot measurement
- 9,6 kb/s Data Terminal on Rear Panel Band Scope
General
Frequency Coverage
Receive
- 0,030 - 60,000 MHz, 144-148 MHz *1*2
Transmit
- 1,800 - 1,999 MHz*2
- 3,500 - 3,999 MHz*2
- 7,000 - 7,300 MHz*2
- 10,100 - 10,150 MHz
- 14,000 - 14,350 MHz
- 18,068 - 18,168 MHz
- 21,000 - 21,450 MHz
- 24,890 - 24,990 MHz
- 28,000 - 29,700 MHz
- 50,000 - 54,000 MHz*2
- 144,000 - 148,000 MHz*2
*1 Except for some frequency ranges
*2 Depending on version
Mode
- USB, LSB, CW, RTTY, AM, FM
Number of Memory Channels
- 102 (99 regular, 2 scan edges and 1 call)
Antenna Connector
- SO-239x3 [2 for HF and 50 MHz bands + 1 for 144 MHz band]
Usable Temperature Range
Frequency Stability
- Less than ±7 ppm from 1 min. to 60 min. after power ON. After that, the rate of stability change is less than ±1 ppm at
+25°C. Temperature fluctuations 0°C to +50°C less than ±5 ppm.
Power Supply Requirement
- 13,8 V DC (±15% negative ground)
Current Drain (at 13,8 V DC)
- Transmit max. power: 20 A
- Receive standby: 2,5 A
max. audio: 2,7 A
Dimensions (approx)
- 287(W) x 120(H) x 316.5(D) mm (projections not included)
Weight (approx)
Transmitter
Output Power
- SSB/CW/RTTY/FM: 5-100 W
- AM: 2-40 W
Modulation System
- SSB, AM: Balanced modulation
- FM: Variable reactance modulation
Spurious Emissions
- -50 dB (HF)
- -60 dB (50/144 MHz)
Carrier Suppression
Unwanted Sideband Suppression
Delta TX Variable Range
Microphone Connector
Receiver
Sensitivity
- SSB, CW, RTTY (10 dB S/N):
- 0,16 µV (1,8-29,99 MHz)*1
- 0,13 µV (50 MHz)*2
- 0,11 µV (144 MHz)*3
- AM (10 dB SINAD):
- 13 µV (0,5-1,799 MHz)
- 2,0 µV (1,80-29,99 MHz)*1
- 1.0 µV (50/144 MHz)*2,3
- FM (12 dB SINAD):
- 0,5 µV (28,0-29,99 MHz)
- 0,25 µV (50 MHz)*2
- 0,18 µV (144 MHz)*3
*1 Pre-amp 1 ON
*2 Pre-amp 2 ON
*3 Pre-amp ON
Squelch Sensitivity
- USB, LSB, CW, RTTY - Less than 5,6 µV
- FM - Less than 1,0 µV
Selectivity
- USB, LSB, CW, RTTY - More than 2,1 kHz/-6 dB. Less than 4,0 kHz/-60 dB
- AM, FM-N - More than 9,0 kHz/-6 dB. Less than 20 kHz/-40 dB
- FM - More than 12 kHz/-6 dB. Less than 30 kHz/-50 dB
Spurious and Image Rejection Ratio
- More than 70 dB (except IF through in 50 MHz band)
RIT Variable Range
Audio Output Power (at 13,8 V DC)
- More than 2,0 W at 10% distortion with an 8 Ω load
Supplied Accessories
- Hand microphone
- Spare fuses
- Key plug
- DC power cable
Options
Automatic Antenna Tuners, Antenna Element and Antenna Selector
- AH-4 HF + 50 MHz AUTOMATIC ANTENNA TUNER: Covers 3,5 - 54 MHz with a 7 m or longer wire antenna.
- AH-2b ANTENNA ELEMENT: A 2,5 m long antenna for mobile operation with the AH-3. All bands between 7 - 54 MHz can be matched.
- EX-627 AUTOMATIC ANTENNA SELECTOR: For up to 9 separate antenna connections.
Power Supplies
- PS-85 DC POWER SUPPLY: Output: 13,8 V DC (20 A max.)
External Speakers
- SP-21 EXTERNAL SPEAKER:
- Designed for base station operation.
- Input impedance: 8 Ω
- Max input power: 5 W
Microphones
- SM-8 DESKTOP MICROPHONE: Electret condenser-type desktop microphone including
two connection cables for simultaneous connection of two transceivers. [Up/Down] switches are included.
- SM-20 DESKTOP MICROPHONE: Unidirectional, electret microphone for base station operation. Includes [Up]/[Down] switches and a low cut function.
- HM-36 HAND MICROPHONE: Same as supplied.
Others
- CT-16 SATELLITE INTERFACE UNIT: Easy tuning when connecting another ICOM VHF transceiver for instant satellite communications.
- CT-17 CI-V LEVEL CONVERTER: For remote transceiver control using a personal computer. Equipped with an RS-232C port. You can change frequencies, operating mode, memory channels, etc.
- UT-102 VOICE SYNTHESIZER UNIT: Announces operating frequency and mode.
- CR-282 HIGH-STABILITY CRYSTAL UNIT: Contains a temperature-compensating oven heater and crystal unit for improved frequency stability. Frequency stability: ±
0,5 ppm.
Brochure in PDF
Bo, OZ2M, www.rudius.net/oz2m